1
DATA ITEM DESCRIPTION
Title: ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) VERIFICATION
PROCEDURES (E3VP)
Number: DI-EMCS-81541A Approval Date: 20021219
AMSC Number: F7487 Limitation:
DTIC Applicable: No GIDEP Applicable: No
Office of Primary Responsibility: 11
Applicable Forms:
Use/relationship: The E3VP describes the methods of test, analysis, and inspection used by the
contractor to verify compliance with the electromagnetic environmental effects (E3) interface
and performance requirements of a system. The E3VP provides the means for the government to
understand and duplicate verification methods used by the contractor to verify E3 requirements.
a. This DID contains the format and content preparation instructions for data resulting from the
work task described by 4.1 of MIL-STD-464 and is intended for airborne, sea, space, and ground
systems, including associated ordnance. It is normally applied to the System Design and
Development phase of a program, but it can be used in any phase.
d. This DID is related to DI-EMCS-81540A and DI-EMCS-81542A.
Requirements:
1. Reference documents: The applicable issue of the documents cited herein, including their
approval dates and dates of any applicable amendments, notices, or revisions, shall be as cited in
the solicitation or contract.
2. Format. The E3VP shall be in contractor format.
3. Content. The E3VP shall describe the overall verification methods being used and shall
provide detailed verification procedures (test, analysis, and inspection, as applicable) for each E3
requirement specified in the contract for the system being developed..
3.1 Summary information. The E3VP shall summarize the following:
3.1.1 Introduction, background.
a. System description, including any pertinent information regarding verification issues.
b. Statement of any assumptions and limitations associated with verification.
c. General objectives.
3.1.2 Scope. General description of overall verification matrix being used to demonstrate
compliance with requirements, including the relative role of analyses, tests and inspections.
3.1.3 Methods of verification. Abstracts of the procedures used for verifying each E3
requirement listed in 3.2 below.
Downloaded from http://www.everyspec.com
