DATA ITEM DESCRIPTION
Title: HEMP PROTECTION SUBSYSTEM PERFORMANCE TEST PLAN
Number: DI-EMCS-81851 Approval Date: 20111128
AMSC Number: 9231 Limitation: N/A
DTIC Applicable: Yes GIDEP Applicable: N/A
Defense Technical Information Center
Attn: DTIC-OMI
8725 John J. Kingman Road, Ste 0944
Fort Belvoir VA 22060-6218
Office of Primary Responsibility: DS
Applicable Forms: None
Use/Relationship:
The HEMP Protection Subsystem Performance Testing Plan describes the methods of test,
analysis, and inspection used by the contractor to verify compliance with the HEMP interface
and performance requirements of an aircraft during the engineering development phase. The Plan
provides the means for the government to understand and duplicate verification methods used by
the contractor to verify HEMP protection requirements.
1. This DID contains the format, content, and intended use information for the data product
resulting from the work task described by sections C.4.7, C.5.1, and C.5.2 of MIL-STD-3023 and
is intended for aircraft systems. It is normally applied to the System Design and Development
phase of a program, but it can be used in any phase.
2. This DID is related to DI-EMCS-81850 and DI-EMCS-81852.
Requirements:
1. Reference documents. The applicable issue of the documents cited herein, including their
approval dates and any applicable amendments, notices, or revisions shall be as cited in the
ASSIST Online( https://assist.daps.dla.mil/online/start/) at the time of the solicitation, or for non-
ASSIST listed documents, as stated herein. HEMP Protection Subsystem Performance Test Plan
classification shall be determined using DNA-EMP-1, Electromagnetic Pulse (EMP) Security
Classification Guide (U) available by mail request to ATTN: RD-NTSA/Rooney M., Defense
Threat Reduction Agency, 8725 John J. Kingman Road, MSC 6201 Fort Belvoir, Virginia
22060-6201, and any relevant system specific classification guides.
2. Format. The Plan shall be in contractor format.
3. Content. The Plan shall describe the test plan for the Continuous Wave Immersion (CWI)
and the Pulse Current Injection (PCI) tests for each requirement specified in the contract for the
aircraft being developed.
3.1 Summary information. The Plan shall summarize the following:
3.1.1 Introduction.
Downloaded from http://www.everyspec.com
