1
DATA ITEM DESCRIPTION
Title: Destructive Physical Analysis Plan
Number: DI-QCIC-81706 Approval Date: 24 NOV 2006
AMSC Number: 7660 Limitation: N/A
DTIC Applicable: No GIDEP Applicable: No
Office of Primary Responsibility: NS/I5231
Applicable Forms: N/A
Use/Relationship:
The Destructive Physical Analysis plan identifies in detail how the contractor will
establish sampling, acceptance, and rejection criteria for DPA of parts for use in high
reliability spacecraft equipment.
This Data Item Description (DID) contains the format and content preparation instruction
for the data generated by the specific and discrete task requirements as delineated in the
contract. Refer to MIL-STD-1580(B)1, "Destructive Physical Analysis (DPA) for
Electronic, Electromagnetic, and Electromechanical Parts," (entire document) for further
guidance on the part types subject to DPA.
Requirements:
1. Reference documents. The applicable issue of the documents cited herein, including
their approval dates and dates of any applicable amendments, notices, and revisions, shall
be as cited in the current issue of the DODISS at the time of the solicitation.
2. Format. The Destructive Physical Analysis plan shall be in the contractor's format.
3. Content: The Destructive Physical Analysis (DPA) plan shall contain the following:
3.1. Lot sampling technique. Describes the method of conducting the lot sampling for
each device type.
3.2. Lot acceptance criteria. Describes the acceptance criteria that will be applied
against each device type.
3.3. Lot rejection criteria. Describes the rejection criteria that will be applied against
each device type.
3.4. Sample storage. Describes how the DPA samples will be identified for retention and
how and where the samples will be stored throughout the duration of the contract.
Downloaded from http://www.everyspec.com
