DI-QCIC-81960
1
DATA ITEM DESCRIPTION
Title: MEASUREMENT SYSTEM EVALUATION (MSE) – MEASUREMENT AND INSPECTION
EQUIPMENT SYSTEM DESIGN DOCUMENTATION FOR ACCEPTANCE OF PRODUCT
Number: DI-QCIC-81960 Approval Date: 25 February 2014
ASMC Number: 9461 Limitation: N/A
DTIC Applicable: N/A GIDEP Applicable: No
Office of Primary Responsibility: (AR) , RDAR-EIQ-SE
Applicable Forms: N/A
Use/relationship: The Measurement and Inspection Equipment System Design documentation for
Acceptance of Product describes the Acceptance Inspection Equipment (AIE), Automated AIE (AAIE),
and various measurement systems, used to meet the inspection and test requirements to deliver units
and other end products that conform to contract, specification, QAP and drawing requirements. This
documentation is used to evaluate the acceptability of these designs to meet contract requirements.
a. This Data Item Description (DID) contains the format and content preparation instructions for the data
product generated by the specific requirement delineated in the contract.
b. This DID is applicable to all AIE as required by the contract.
Requirements:
1. Reference Documents
. The applicable documents cited herein, including their approval dates and
dates of any applicable amendments, notices, and revisions, shall be as cited in contract documentation.
2. Format
. Contractor’s format is acceptable.
3. Content
. An AIE package shall include the following (as applicable).
3.1 Cover Sheet
. Cover sheet information includes the following:
a. Prime contractor name, address, and contact information.
b. Contract number.
c. Nomenclature of item(s) being produced under contract.
d. Applicable drawing(s), specifications and Quality Assurance Provisions (QAPs).
e. Date and revision of “New” or “Revised” documentation.
f. Sub-component or assembly (if applicable).
g. Subcontractor(s) name, address, and contact information (if applicable).
3.2 Measuring and Inspection Equipment System Design Documentation
. Measuring and
inspection equipment system design documentation covers a variety of measurement systems
and equipment used to evaluate acceptability of units to meet requirements. See ISO 9000
paragraph 3.8.2, Inspection and 3.10.4, Measuring Equipment.
3.3 Master List / Matrix
. A detailed Master List or Matrix cross references each characteristic and
its inspection requirement from the applicable drawings, specifications and QAPs with the
proposed inspection methods and equipment. The Master List or Matrix information includes
the following:
a. Drawing, specification or QAP number with revision and date of item being inspected.
b. Amendments, Engineering Change Proposals (ECPs), Notices of Revision (NORs), etc.
c. Specification or QAP paragraph number.
d. Drawing, specification, or QAP characteristic letter/number, description, and inspection
requirement.
