DATA ITEM DESCRIPTION
Title: EXPLOSIVE HAZARD CLASSIFICATION DATA REPORT (EHCDR)
Preparing Activity: 40 (AFMC/SE)
Project Number: SAFT-2015-009
Use/Relationship: The Explosive Hazard Classification Data Report is used to
obtain the
necessary information for assigning hazard classifications, such as hazard class/division,
storage compatibility group, and Department of transportation (DoT) marking. These
classifications establish the procedures for the storage and transportation of the item for all
user elements.
a. This Data Item Description (DID) is applicable to the acquisition of any new explosive item
or component which has not previously received an approved hazard classification.
b. This DID contains the content and format preparation instructions for the data products
generated by MIL-STD-882, System Safety, and any specific and discrete task requirements
as delineated in the contract.
c. This DID is related to DI-SAFT-80101, System Safety Hazard Analysis Report (SSHAR);
DI-SAFT-80105, System Safety Program Progress Report (SSPPR); and DI-SAFT-80106,
Health Hazard Assessment Report (HHAR).
(Copies of MIL-STD-882 and these DIDs are available online at http://quicksearch.dla.mil
.)
d. This DID supersedes DI-SAFT-81299B.
Requirements:
1. Reference documents. The applicable issue of the documents cited herein, including their
approval dates and dates of any applicable amendments, notices, and revisions, shall be as
specified in the contract.
2. Format. The EHCDR shall be in contractor format.
3. Content. The EHCDR shall contain the following:
3.1 Type of classification. Include a statement as to the type of classification being sought,
either interim or final.
3.2 Hazard classification data: The data necessary for assignment of hazard classification
will be supplied as shown below, using additional
pages if sufficient space is not available.
The “used on” or “used with” hardwire item(s) will be identified, including thei
r ancillary or
delivery equipment. For interim hazard classifications, some of this data may not be
available, but all should be available for final hazard classifications.
3.2.1 Nomenclature. (see FED-STD-5, Standard Guides for Preparation of Proposed Item
Logistics Data Records.)
(Copies of this document are available online at http://quicksearch.dla.mil
.)
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
