[NOT MEASUREMENT SEN
SITIVE]
FED-STD-313F
October 12, 2018
SUPERSEDING
FED-STD-313E
July 1, 2014
FEDERAL STANDARD
MATERIAL SAFETY DATA, TRANSPORTATION DATA AND
DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO
GOVERNMENT ACTIVITIES
The General Services Administration has authorized the use of this federal standard by
all federal agencies.
SCOPE AND PURPOSE
1.1 Scope. This standard establishes requirements for the preparation and submission of
Safety Data Sheets (SDSs) and hazardous warning labels, as defined in 5.3.9, by contractors
who provide hazardous materials to government activities.
1.2 Purpose. This Standard expands on the Occupational Safety and Health Administration
(OSHA) definition of hazardous materials. Data obtained will be used within the government
in employee safety and health programs and to provide for safe handling, storage, use,
transportation and environmentally acceptable reuse or disposal of hazardous materials by
government activities.
REFERENCED DOCUMENTS
2.1 Government Publication. The issues of the following documents, in effect on the date of
invitation for bids or request for proposals, form a part of this standard to the extent specified
herein.
CODE OF FEDERAL REGULATIONS (CFRs)
Title 10 – Energy
Title 29 – Labor
Title 40 – Protection of Environment
Title 49 – Transportation
(Copies of CFRs are available on line at www.ecfr.gov or from the Superintendent of
Documents, US GPO, North Capital and H streets, N.W., Washington, DC 20402-0002. A
Toxic Release Inventory (TRI) chemical list (EPA 745/K-94-052) is available from the
EPCRA Document Distribution Center, 11029 Kenwood Road, Cincinnati, 45242, Attention
NCEPI, or on the Internet at www.epa.gov/tri/).
US Air Force Manual 24-204 Joint service Publication:
“AFMAN 24-204/TM38-250/NAVSUP PUB 505/DLAI 4145.3 Preparing Hazardous Materials for
Military Air Shipments”
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other data
which may improve this document should be sent to: General Services Administration (GSA), Federal
Acquisition Service (FAS), Policy, Standards, and Engineering Branch (QSDPA), 1800 F Street NW,
Rm. G300 Washington, DC 20405; or fedstd313@gsa.gov.
FSC MISC
Downloaded from http://www.everyspec.com
