MS8005D
w/AMENDMENT 1
09 September 2005
SUPERSEDING
MS8005D
24 September 2003
DETAIL SPECIFICATION SHEET
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED
FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-25579.
Hose assembly dimensions for style A: See table l.
TABLE I.
Hose assembly dimensions for style A. 1/
1/ Style A uses class 1 fittings which are made from corrosion resistant steel (CRES).
Fitting ends Dimensions 2/
1 2
Hose
size
A (nom) B ( max) C (max) F (max)
3/4 0.372 1.049 0.620 0.580
4 0.375 1.049 0.620 0.654
5 0.380 1.194 0.680 0.726
6 0.380 1.303 0.750 0.798
Straight Straight 8 0.438 1.465 0.880 1.014
10 0.515 1.680 0.967 1.158
12 0.570 1.727 1.122 1.447
16Z 0.620 2.101 1.480 1.736
20Z 0.640 2.255 1.750 2.328
24Z 0.765 2.400 2.150 2.621
INCH-POUND
2
/ Dimensions are shown on figure 1.
FIGURE 1. Style A hose assembly
.
AMSC N/A FSC 4720
Downloaded from http://www.everyspec.com
