AMSC N/A FSC 59GP
MIL-PRF-15733J
6 July 2010
SUPERSEDING
MIL-PRF-15733H
25 November 2003
PERFORMANCE SPECIFICATION
FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for low-pass filters and capacitors used to suppress
radio frequency/electromagnetic interference. Filters furnished to the requirements of this specification contain
shunting capacitors and series inductors (FSC 5915). Capacitors furnished to the requirements of this specification
contain shunting capacitors (FSC 5910). For the purposes of this specification, feed-thru capacitor types (C circuit
configuration) are referred to herein as a filter. Passband power may be alternating current (ac) and/or direct current
(dc) and the filter is used primarily in the reduction of broadband radio frequency interference.
1.2 Classification.
1.2.1 Part or identifying Number (PIN). Filters specified herein (see 3.1) are identified by a PIN which consists of
the basic number of the specification sheet and a dash number. The PIN is in the following format:
M15733/01- 0001
Specification Dash
sheet number
(See 1.2.1.1)
1.2.1.1 Dash number. The dash number is as specified in the individual specification sheet (see 3.1).
1.2.2 Style. The style (see 3.1) is identified by the two-letter designation “FL” followed by a two-digit number. The
letters identify radio frequency interference suppression filters and the digits identify the general shape and mounting
of the case.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this specification. This section
does not include documents cited in other sections of this specification or recommended for additional information or
as examples. While every effort has been made to ensure the completeness of this list, document users are
cautioned that they must meet all specified requirements of documents cited in sections 3 or 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center
Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43218-3990 or E-mailed to
capacitorfilter@.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.daps.dla.mil.
Downloaded from http://www.everyspec.com
