MIL PRF 17331L 润滑油蒸汽涡轮和齿轮中等服务(2018年8月17日)

ID:50918

大小:0.32 MB

页数:30页

时间:2023-03-19

金币:20

上传者:战必胜
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy mil, with the subject line “Document Comment”. Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A FSC 9150
DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.
METRIC
MIL-PRF-17331L
17 August 2018
SUPERSEDING
MIL-PRF-17331K(SH)
7 May 2013
PERFORMANCE SPECIFICATION
LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a single classification of moderate service steam turbine and gear
lubricating oil for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as
well as for general mechanical lubrication. The lubricating oil will be identified as follows:
Military symbol
2190 TEP
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9510-AB-ATM-010
-
Nuclear Powered Submarine Atmosphere Control Manual
(Copies of the chapter titled “Material Control Program” are available by email request to
CommandStandards@navy mil.)
T9070-AL-DPC-020/077-2
-
NAVSEA Hazardous Material Avoidance Process
(Copies of this document are available online via Technical Data Management Information System [TDMIS] at
https://mercury.tdmis navy mil by searching for the document number without the suffix. Refer questions, inquiries,
or problems to: DSN 296-0669, Commercial (805) 228-0669. This document is available for ordering [hard copy]
via the Naval Logistics Library at https://nll.navsup.navy.mil. For questions regarding the NLL, contact the NLL
Customer Service at nllhelpdesk@navy.mil, (866) 817-3130, or (215) 697-2626/DSN 442-2626.)
Downloaded from http://www.everyspec.com
资源描述:

当前文档最多预览五页,下载文档查看全文

此文档下载收益归作者所有

当前文档最多预览五页,下载文档查看全文
温馨提示:
1. 部分包含数学公式或PPT动画的文件,查看预览时可能会显示错乱或异常,文件下载后无此问题,请放心下载。
2. 本文档由用户上传,版权归属用户,天天文库负责整理代发布。如果您对本文档版权有争议请及时联系客服。
3. 下载前请仔细阅读文档内容,确认文档内容符合您的需求后进行下载,若出现内容与标题不符可向本站投诉处理。
4. 下载文档时可能由于网络波动等原因无法下载或下载错误,付费完成后未能成功下载的用户请联系客服处理。
关闭