AMSC N/A FSC 5910
DISTRIBUTION STATEMENT A
. Approved for public release; distribution is unlimited.
INCH-POUND
MIL-PRF-31033A
3 November 2003
SUPERSEDING
MIL-PRF-31033
9 August 1996
PERFORMANCE SPECIFICATION
CAPACITORS, FIXED, CERAMIC DIELECTRIC, HIGH
RELIABILITY, DISCOIDAL, GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
* 1.1 Scope
. This specification covers the requirements for high reliability, discoidal, ceramic dielectric, fixed
capacitors. This specification provides for two levels of product requirements: Class B and class S. Capacitors
furnished to the requirements of this specification are intended for use in Radio Frequency/ Electromagnetic
Interference (RFI/EMI) suppression filters covered by MIL-PRF-28861. This specification establishes a Qualified
Manufacturers List (QML) for discoidal capacitors that requires demonstration of control of the quality system and
manufacturing process and qualification of representative discoidal capacitor designs.
1.2 Classification
. Discoidal capacitors are classified into one of the following reliability levels as specified (see
6.2).
* 1.2.1 Product level
. Two product levels of discoidal capacitors are provided for in this specification. The product
level is identified by a single letter in accordance with table I:
* TABLE I. Product level
.
Symbol Level
B
S
Class B
Class S
a. Class B - Class B is the base product level of this specification and is intended for all applications except for
space applications. Class B discoidal capacitors are those which have been subjected to and
passed all applicable requirements, tests, and inspections detailed herein, including qualification
and conformance inspection requirements for Class B.
b. Class S - Class S is the highest product level of this specification and is intended for space applications. Class
S discoidal capacitors are those which have been subjected to and passed all applicable requirements,
tests, and inspections detailed herein, including qualification and conformance inspection requirements
for Class S.
*
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000 or e-mailed to
capacitorfilter@dscc.dla.mil
. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil
.
Downloaded from http://www.everyspec.com
