MIL-A-8243D
26 October 1985
SUPERSEDING
MIL-A-8243C
17 November 1980
MILITARY SPECIFICATION
ANTI-ICING AND DEICING-DEFROSTING FLUIDS
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope.
This specification covers the requirements for two types of
anti-icing and deicing-defrosting fluids for use on aircraft.
1.2 Classification. The anti-icing and deicing-defrosting fluids covered
by this specification shall be of the following types, as specified (see
6.2.1):
Type I - Propylene Glycol base fluid with Inhibitor
Type 11 - Ethylene Glycol base fluid with Inhibitor
2.
Applicable DOCUMENTS
2.1 Government documents.
-
2.1.1 Specifications and standards.
Unless otherwise specified, the
following specifications and standards of the issue listed in that issue of
the Department of Defense Index of Specifications and Standards (OODISS)
specified in the solicitation form a part of this specification to the extent
specified herein.
SPECIFICATIONS
FEDERAL
QQ-A-250/4 -
Aluminum Alloy 2024, Plate and Sheet.
QQ-A-250/5 - Aluminum Alloy Alclad 2024, Plate and Sheet.
QQ-A-250/ 13 - Aluminum Alloy Alclad 7075, Plate and Sheet.
QQ-M-44
Magnesium Alloy Plate and Sheet (AZ31B).
QQ-P-416 ~ Plating, Cadmium (Electrodeposi ted).
‘ Beneficial comments (recommendations, additions,
‘z
del~~ions) and any pertinent data”
which may be of use in improving this document should be addressed to: Systems
Engineering and Standardization Department (Code 93), Naval Air Engineering Center
Lakehurst, NJ 08733, by using the self-addressed Standardization Document Improve-
.ment Proposal (DD Form 1426) appearlnq at the end of this document or b letter.
FSC 6850
DISTRIBUTION STATEMENT A, Approved for public release; distribution is unlimited.
k..
—.
Downloaded from http://www.everyspec.com
