I
MIL-A-13374E
25 August 1983
SUPERSEDING
MIL-A-13374D
8 liu~st 1975
MILITARY SPECIFICATION
ADHESIVE, DEXTRIN, FOR USE IN AMMUNITION CONTAINERS
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1.
SCOPE AND CLASSIFICATION
1.1 Scope.
This specification covers four classes of vegetable dextrin
adhesive intended for use in the manufacture of spirally-wound containers, and
in the fabrication of chipboard spacers to
be used in such containers, for use
in packing ammunition and components.
1.2 Classification.
Vegetable dextrin adhesive shall be of the following
classes as specified (see 6.2):
Class 1 - A liquid adhesive in prepared form.
Class 2 -
A cold-water-soluble type which must be mixed with water
before use.
Class 3 - A prepared dry adhesive which must first be cooked with
water before use.
Class 4-
Dextrin base in dry form to which
chemical ingredients may be added
water before use (see 3;2).
2.
APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks.
specified,the followingspecifications,standards,
additional optional
during preparation with
Unless otherwise
and handbooks of the issue
listed in that issue of the Department of Defense Index of Specifications and
Standards (DoDISS) specified in the solicitation form a part of this
specification to the extent specified herein.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Director, US Army Materials and Mechanics Research Center, ATTN:
DRXMR-SMS,
Watertown, Fa
02172 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
/ FSC 8040 /
Downloaded from http://www.everyspec.com
