Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond,
VA 23297-5616 or emailed to STDZNMGT@dla.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
database at http://assist.daps.dla.mil/
.
AMSC N/A AREA PACK
NOT MEASUREMENT SENSITIVE
MIL-DTL-197K
w/Amendment 1
11 October 2005
SUPERSEDING
MIL-DTL-197K
25 January 2005
DETAIL SPECIFICATION
PACKAGING OF BEARINGS,
ASSOCIATED PARTS AND SUBASSEMBLIES
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the cleaning, drying, preservation, packaging, and
packaging marking requirements for all types and sizes of stock and production bearings,
associated parts, and subassemblies (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 or 4 of this specification,
whether or not they are listed.
2.2 Government documents
.
2.2.1 Specifications and standards
. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
Downloaded from http://www.everyspec.com
