~
MIL-F-22606C(SH)
11 Aumtst 1992
SUPERSEDING
MIL-F-22606B(SHIPS)
12 June 1964
(See 6.6)
MILITARY SPECIFICATION
FLASK COMPRESSED GAS AND END PLUGS FOR AIR , OKYGSN
AND NITROGEN
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agent ies of the Department of Defense.
1. SCOPE
1.1 -. This specification covers seamless steel
forged heads and various composition end plugs for storing
oxygen, nitrogen, helium, or helium-oxygen mixtures)
1
1.2 Classification.
Flasks and end plugs are of the
classes, and services as specified (see 6.2)
‘&psQ:
Type GF -
Type GFS -
Type CD -
Type CDS -
Type SF -
Type IF -
Classes:
Class 600
Class 3000
Class 5000
flasks with integral
compressed gases (air,
following types,
General service flask,
General service flask,
figure 1),
General service flask,
General service flask,
figure 1).
Air moisture seDarator
straight design (see figure 1).
skirted, straight design (see
curved design (see figure 1)
skirted, curved design (see
flask (see fizure 2) .
Impulse flask (~ee figure 3) . -
- 600 pounds per square inch (psi) maximum working
pressure.
- 3000 psi maximum working pressure.
- 5000 psi maximum working pressure.
Beneficial comments (recommendations , additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea SysternsCommand, SSA 05Q42 , 2531 National Center Bldg 3,
Washington, DC 20362-5160 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
AMSC N/A
FSC 8120
~. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
