INCH-POUND
MIL-G-5514G
1 NOVEMBER 1993
SUPERSEDING
MIL-G-5514F
15 JANUARY 1969
MILITARY SPECIFICATION
GLAND DESIGN; PACKINGS, HYDRAULIC,
GENERAL REQUIREMENTS FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 scope. This specification covers basic design criteria recommenda-
tions for use and application in packings, gaskets, packing and gasket glands
and related features for use in hydraulic equipment utilized in systems
designed in accordance with MIL-H-5440.
1.2 Classification. Hydraulic system packings and gaskets shall be of the
following types and classes:
Types
Temperature range
Type I
-65° to +160
0
F
Type II
-65° to +275
0
F
Type III
-65
0
to +450
0
F
Classes
Class 1 1,500 psi - Where the unit operating pressure at the packing is a
normal 1,500 pounds per square inch (psi).
Class 2, 3,000 psi - Where the unit operating pressure at the packing is a
normal 3,000 psi.
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following specifica-
tions, standards, and handbooks form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents
are those listed in the issue of the Department of Defense Index of Specifi-
cations and Standards (DODISS) and supplement thereto, cited in the solicita-
tion (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should
be addressed to:
Oklahoma City Air Logistics Center/TICLA, Tinker
AFB, OK 74145-5990 by using the Standardization Document Improvement
proposal (DD Form 1426) appearing at the end of this document or by
letter.
AMSC N/A
FSC 1650
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
