lfIL-H-370F
I~ERIH AMENDKENT 1 (XE)
31 March 1987
(
HOSES AND ROSEASSEMBLIES, 190NXETALLIC:
RUBBER, LIQUID FUEL
Thin interim amendment is
approved for use within the US Amy Belvoir
Research, Development, and Engineering ~ente~, Department of the Army,
with 141L-H-370F, dated 8 October 1986.
PAGE4
2.1.1, under STANDARDS, FEDERAL, ●dd:
“FEbSTD-595
- Colors.”
PAGE 8
3.4.1.2, delete
in its entirety and substitute:
“3.4.1.2 Cover. The cover shall be fabricated from material as specified in
3.3.2.2, and shall be of uniform thickness not less than 5/64 inch. The cover
color shall be sand matte,
in accordance with FED-STD-595, color chip 30277.”
PACE 10
3.6, lines 5 and 6,
delete the sentence
“The letter shall be molded . . . 0.50
inch high.”,
and substitute the following new sentence:
“The letters shall be a
minimum of 0.18-inch high.”.
Line 8, after
“cover color.”, add the following new sentences:
“Each hose shall
be marked with a longitudinal black stripe not less than 0.125-inch and
extending
the full length of the hose.
The label may be within the longitudinal
stripe provided the stripe is not
less
than 0.20-inch greater than the height of
the letters and the letters
are in contrast to the stripe color.
The label may
substitute for the longitudinal stripe, provided it is continuous
and extends
the full length of the hose and is black in color.”
AHSC N/A
FSC 4720
DISTRIBUTION STA’IWWNT A.
Approved for public release;
distribution is unlimited.
(
Page 1 of 2
Downloaded from http://www.everyspec.com
