MIL-H-6615E
AMENDMSNT 3
ANENDMENT 2
22,Nov 1985
MILITARY SPECIFICATION
HOSE ASSEMBLIES , RUBBER, FUEL AND WATER, WITH
LOW TEllPERATURS
REATTACHABLE COUPLINGS ,
This amendment forms a part of Military Specification MIL-H-6615E, dated 12 Mar 1984,
and is approved for use by all Departments and Agencies of the Department of Defense.
PAGE 1
*Add to bottom of page:
AMSC N/A
,,DIs~IBUTION sTATSEC3NTA.
Approved for public release; distribution is unli~ited. ”
PAGE 3
3.4.1.1, delete first sentence and substitute:
The inner tube shall be of a high
aromatic aviation fuel - resistant synthetic rubber compound to meet the require-
ments of this specification.
PAGE 4
*Add paragraph 3.4.1.8: Inner tube electrical resistance. Electrical resistance
of the tubes shall be 103 (minimum)
to 10b ohms per meter.
PAGE.5
*Add paragraph 3.4.6 Assembly restriction.
The ends of the hose shall not be shaved,
tapered or have the inner diameter and/or outer diameter changed in any other way, in
order to facilitate attachment .of the end fittings.
PAGE 6
3.7.1, delete MIL-H-6615D and substitute MIL-H-6615.
PAGE 10
*Add paragraph 4.5.13:
Inner tube electrical resistance test. The electrical resist-
ance of the tube shall be within the limits of 10J
(minimm) “to 106 (maximum) ohms per
meter for the unpressured hose and during the proof pressure, paragraph 4. 5.2 and Iow
temperature flexibility, paragraph 4.5.12, test.
AMSC N/A
FSC 4720
DISTRIBUTION STATENSNT A. Approved for public release; distribution is unlimited.
10f2
Downloaded from http://www.everyspec.com
