MIL-I-8670B(AS)
16 September 1993
SUPERSEDING
MIL-I-8670A(AS)
26 JUNE 1974
MILITARY SPECIFICATION
INSTALLATION OF FIXED GUNS AND
ASSOCIATED EQUIPMENT IN NAVAL AIRCRAFT
This specification is approved for use by the Naval Air Systems
Command, Department of the Navy, and Is available for use by all
Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope.
This specification establishes the minimum requirements for the
installation of all types of fixed guns and associated equipment including
ammunition feed and ejection systems in naval aircraft. Installation details
such as mounting arrangements and fastening devices for the separate component
equipments of the gun Installations are contained on drawings or in other
publications specifically applicable to the various equipments. In addition to
installation reaquirements. certain functional requirements for components of the
installations are contained herein. Also contained herin are certain inspection
and test procedures applicable to the installations covered by this
specification. This specification does not contain requirements for gun fire
control equipment or gun boresight alignment.
1.2 Classification. Fixed gun installation are classified into the
following two general types (see 6.2b):
a.
Wing Installations:
Guns mounted in or on the wings.
b. Fuselage Installations:
Guns mounted in the fuselage.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commanding Officer,
Naval Air Warfare Center Aircraft Division Lakehurst,
Systems Requirements Department,
Code SR3, Lakehurst, NJ 08733-5100, by using
the self-addressed Standardization Document Improvement Proposal (DD Form 1426)
appearinq at the end of this document or by letter.
AMSC N/A
FSC 1005
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
