*
*
*
*
*
*
*
*
MILITARY SPECIFICATION
MARKING; STANDARD HOSE, AIRCSWFT
This specification is approved
and Agencies of the Department
1.
SCOPE
MIL-M-6002A
’30March 1982
SUPERSEDING
MIL-M-6002
13 March 1950
for use by all Departments
of Defense.
1.1 -,
This specification covers one type and grade of marking
suitable for the identification of rubber and synthetic rubber hose.
2.
APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards.
Unless otherwise specified (see 6.2),
the following specifications and standards of the issue listed in that
issue of the Department of Defense Index of Specifications and Standards
(DODISS) specified in the solicitation,
form a part of this specification
to the extent specified herein.
SPECIFICATIONS
MILITARY
MIL-H-5606 Hydraulic Fluid, Petroleum Base, Aircraft, Missile, and
Ordnance
STANDARDS
FEDERAL
FED-STD-601 Rubber, Sampling and Testing
(Copies of specifications and standards required by manufacturers in
connection with specific acquisition functions should be obtained from the
procuring activity or ae directed by the contracting of ficer. )
*
2 .1.2 Order of precedence.
In the event of a conflict between the text
of this specification and the reference cited herein, the test of this
specification shall take precedence.
3. REQUIREMENTS
3.1 Materials. Material for marking hose is optional but shall be
uniform in quantity and free from defects. Material which is not
specifically mentioned herein shall be entirely suitable for the purpose
intended.
* Beneficial comments (recommendations, additions, deletions) and any
1
pertinent data which may be of “se in improving this document should be
addressed to: HQ AFLC CASO/LODS, Federal Center, Battle Creek, MI 49016 by
using the self addressed Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
FSC 4720
Downloaded from http://www.everyspec.com
