MIL-M-17060E(SH)
20 May 1977
SUPERSEDING
MIL-M-17060 (SHIPS)
12 January 1972
(See 6.4)
MILITARY SPECIFICATION
MOTORS ,
60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER,
SHIPBOARD USE
This specification is approved for use by the Naval Sea Systems Command and is
available for use by all Departments and Agencies of the Department of Defense,
1.
SCOPE
1.1 Scope.
This specification covers the requirements for 60-hertz (Hz) , three-phase,
integral-horsepower (hp) , alternating current (a.c.) motors for shipboard use.
1.2 Classification.
Motors shall be of the following services, as specified (see
6.1.1)
Service A -
For applications where motors are essential to the military
effectiveness of a ship.
Service C - For applications where motors are not essential to the military
effectiveness of a ship.
(For designs and types, see 3.1.11.)
2
APPLICABLE DOCUMENTS
2.1
Issues of documents.
The following documents,
of the issue in effect on date of
invitation for bids or request for proposal, form a part of this specification to the extent
specified herein.
SPECIFICATIONS
FEDERAL
QQ-B-650 -
Brazing Alloy, Copper, Copper-Zinc, and Copper-Phosphorus.
QQ-B-654 - Brazing Alloys, Silver.
QQ-C-390
- Copper Alloy Castings (Including Cast Bar).
QQ-I-666 - Iron, Malleable Ferritic, for Castings,
QQ-T-390 -
Tin Alloy Ingots and Castings and Lead Alloy Ingots and
Castings (Antifriction Metal) for Bearing Applications.
UU-P-268 -
Paper, Kraft, Wrapping.
GGG-P-781 -
Puller, Mechanical Puller Attachment, Mechanical, and
Puller Set, Mechanical.
PPP-C-850 -
Cushioning Material, Polystyrene Expanded, Resilient (for
Packaging Uses).
PPP-C-1120 -
Cushioning Material,
Uncompressed Bound Fiber for
Packaging.
Beneficial comments (recommendations, additions,
deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander,
Naval Ship Engineering Center, SEC 6124, Department of the Navy,
Washington,
DC 20362 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
FSC 6105
Downloaded from http://www.everyspec.com
