MIL-P-7034D
16_ July 1982
SUPERSEDING
MIL-P-7034C
21 June 1976
MILITARY SPECIFICATION
PULLEYS, GROOVE, ANTIFRICTION-BEARING
GREASE-LUBRICATED, AIRCRAFT
This specification is approved for use by all Departments
and Agencies or the Department of Defense.
1.
SCOPE
1.1 Scope.
This specification covers requirements for single groove pulleys
for antifriction-bearings.
1.2 Classification. Pulleys shall be of the following types as specified (see
6.2):
Type I
- Nonmetallic sheave
Type II
- Metallic sheave
2. APPLICABLE DOCUMENTS
2.1 Government
documents
* 2.1.1
Specificati
ons
and
standards
.
Unless otherwise specified, the following
specifications and standards of the issue listed in that issue of the
Department of Defense Index of Specifications and Standards (DODISS), and
supplemental thereto,
in effect on date of invitation for bids or request for
proposal, form a part of this specification to the extent specified herein.
SPECIFICATIONS
FEDERAL
QQ-A-225/6
QQ-P-416
TT-P-1757
PPP-B-566
PPP-B-636
PPP-B-665
PPP-B-676
Aluminum Alloy Bar, Rod, and Wire,
Finished, 2024
Plating; Cadmium (Electrodeposited
Primer Coating, Zinc Chromate, Low
Boxes, Folding, Paperboard
Box, Shipping, Fiberboard
Boxes, Paperboard, Metal Edged and
Boxes, Set-Up
Rolled, Drawn, or Cold
Moisture, Sensitivity
Components
FSC 3020
Downloaded from http://www.everyspec.com
