.:”>
.)
“r3
,.,
MIL-S-416D.
23 August 1979
SUPERSEDING
NIL-S-416C
20 .September 1974
MILITARY SPECIFICATION
STRAINERS,,WELL,.WATER, WIRE-WOUND
This specification is Approved for uae by all Departments
and Agencies of the Department of Defense.
1.
SCOPE
1.1 =. This specification covers 10-foot long, wire-wound, tele-
scopic type strainers used in connection with water~ell construction.
1.2
Classification.
1.2.1 Strainer designation.
Strainers covered by this specification
shall be designated
in the following form (see 6.2 and 6.5).
Military Specification Number
-a
Size and type code number (see 1.2.2)
Strainer opening code letter (see 1.2.3)
Fittings code number (see 1.2.4)
1.2.2 Size and type. The size and type of strainer (see 3.5 through
3.9) are identified by a single digit number (see Table I).
TABLE .1. Code number to size and type.
Strainer size”
Type of material
(nominal)
Type I Type 11
Type 111
Type IV
4-inch
.,1
2
3
4
6-inch
5 .6
7
8
FSC 4730
Beneficial commants (recormnandatione,additions, deletions) and any
pertinent data which may be of uae in improving this document should
be addressed to: US Army Nobility Equipment Rasearth and Development
Command, ATTN:
,DRIMZ-DS; Fort Belvoir,
VA 22060 by.using the self-
addressed Standardization D6cumen”tImprovement Proposal (DD Form 1426)
appearing at the end Of’=thisdocinnentor by.letter..
,
Downloaded from http://www.everyspec.com
