.,,
. .
.’:
I
e
1 November 1994
SUPERSEDING
MIL-V-3D
3 July 1985
(See 6,9)
MILITARY SPECIFICATION
VALVES , FITTINGS, AND FMNGES
(EXCEPT FOR SYSTENS INDICATED HEREIN) :
,.
PACKAGINC OF
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1
m.
This specification covers the requirements for the packaging
(presentation, packing, and marking) of hardware valves such as globe valves, angle
valves ,
check valves, cross valves , cylinder valves , gate valves, relief valves , and
associated fittings and flanges for shipment and storage.
This document does not
provide packaging requirements for valves, fittings,
and flanges intended for use in
gas generating, fluid, and pneumatic systems with cleanliness and preservation
requirement standards exceeding those specified herein.
1.2 Levels of urotectioq.
1.2.1
?reservatioq.
Level A (see 3.8.1.1).
Lsvel C (see 3.8.1.2).
Commercial (see 3.8.1.3).
s
.
1.2.2 Packing.
Level A (see 3.8.2, 3.8.2.1, and 3.8.2.6).
Level B (see 3.8.2, 3.8.2.1, and 3.8.2.6).
Level C (see 3.8.2, 3.8.2.1, and 3.8.2.6).
Commercial (see 3.8.3) .
Beneficial comments (recommendations , additions,
deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, SEA 03R42, Naval Sea Systems Command, 2531 Jefferson Davis Hwy,
Arlington, VA 22242-5160 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
f
AMsc N/A AREA PACK
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
