IINCH-POUND]
MI L-V-868 (SH)
21
July 1989
MILITARY SPECIFICATION
VALVES , HYDRAULIC DIRECTIONAL CONTROL,
GENERAL SPECIFICATION FOR
This specification is approved for use by the Naval Sea
Department of the Navy, and is available for use by all
Agencies of the Department of Oefense
1. SCOPE
1.1 -. This specification covers the requirements
control valves for use <~ .,ydraulic systems
The valves are
Systems Command,
Departments and
for directional
designed for standard
or quiet operation and utilize quill-type or face seal mounting configurations.
1.2 Classification. Directional control valves shall be designated using
I
the standard part numbers as identified in the applicable specification sheet.
2. APPLICABLE DOCUMENTS
2.1 Government documents
2.1, 1 Specifications , standards and handbooks The following specifica-
tions,
standards , and handbooks form a pare of this document to the extent
specified herein.
Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and
Standards
(DODISS) and supplement
SPECIFICATIONS
FEDESLAL
PPP-B-566 - Boxes,
PPP- B-601 - Boxes.
PPP-B-636 - Boxes,
PPP-B-676 - Boxes,
thereto, cited in the solicicac~on (see 6.2)
Folding, Paperboard.
Wood, Cleated-Plywood
Shipping, Fiberboard.
Setup.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use i“ improving this document should be addressed co :
Commander , Naval Sea Systems Command,
St% 5523, Department of the Navy,
Washington, DC 20362.5101 by using the self-addressed Standardization Document
Improvemen’c Proposal (OD Form 1426) appearing at the end of this document or by
letter.
AMSC N/A
FSC 4810
DISTRIBUTION STATEMENT A,
ApprOved fOr public release; distribution is unlimited
Downloaded from http://www.everyspec.com
