MIL-V-16556E(SH)
29 March
1988
SUPERSEDING
MIL-V-16556D(SHIPS)
1 May 1973
(See 6.7)
MILITARY SPECIFICATION
VALVE, SOLENOID, THREE-WAY BYPASS (NAVAL SHIPBOARD USE)
This specification is approved for use within the Naval Sea Systems Command,
Department of the Navy,
and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope.
This specification covers three-way bypass valves, solenoid
operated, for use as salinity actuated dump valves.
2.
APPLICABLE DOCUMENTS
2.1 Governme
nt documents.
2.1.1 Speci
fications and standards.
The following specifications and
standards form a part of this specification to the extent specified herein.
Unless otherwise specified,
the issues of these documents shall be those listed
in the issue of the Department of Defense Index of Specifications and Standards
(DoDISS) and supplement thereto, cited in the solicitation.
SPECIFICATIONS
FEDERAL
QQ-N-281 - Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip,
Wire,
Forgings,
and Structural and Special Shaped
Sections.
MIL-S-901
- Shock Tests, H.I.
(High Impact);
Shipboard Machinery,
Equipment and Systems, Requirements for.
MIL-E-917 - Electric Power Equipment, Basic Requirements (Naval
Shipboard Use).
Beneficial comments (recommendations, additions,
deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander,
Naval Sea Systems Command, SEA 5523, Department of the Navy,
Washington,
DC 20362-5101 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
AMSC N/A
FSC 4810
DISTRIBUTION STATEMENT A
Approved for public release; distribution unlimited
Downloaded from http://www.everyspec.com
