MIL-V-19069B
20 January 1986
SUPERSEDING
MIL-V-19069A(ASG)
30 April 1957
MILITARY SPECIFICATION
VALVE, CHECK, HYDRAULIC, AIRCRAFT, TYPE II SYSTEMS
This specification has been approved for use by all Departments
and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope.
This specification covers hydraulic check valves for use in
type II aircraft hydraulic systems conforming to specification MIL-H-5440.
The complete specification for these check valves consists of specification
MIL-H-8775, which covers the general requirements common to all aircraft
hydraulic components, and this specification which includes additional
requirements specifically applicable to type II check valves.
1.2 Part number.
Hydraulic check valves furnished under this specifi-
cation shall
bear the appropriate number code in accordance with the following
(see 3.5):
2.APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards.
The following specifications and
standards form a part of this specification to the extent specified herein.
Unless otherwise specified, the issues of these documents shall be those
listed in the issue of the Department of Defense Index of Specifications and
Standards (DODISS) and supplement thereto, cited in the solicitation.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Systems Engineering and Standardization Department (Code 93), Naval Air
Engineering Center, Lakehurst, NJ 08733,
by using the self-addressed
Standardization Document Improvement Proposal (DD Form 1426) appearing at the
end of this document or by letter.
AMSC N/A
FSC 1650
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
