AMSC N/A FSC 5935
DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.
MIL-DTL-28754E
w/AMENDMENT 2
12 December 2022
SUPERSEDING
MIL-DTL-28754E
w/AMENDMENT 1
27 April 2021
DETAIL SPECIFICATION
CONNECTORS, ELECTRICAL, MODULAR,
AND COMPONENT PARTS
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for backplane connectors, module
connectors, cable connectors, and their component parts.
1.2 Classification.
1.2.1 Types. Connectors and assemblies covered by this specification are of the following types:
Type III – Aluminum base plate assembly with contact and bushing set.
Type IV – Module blade connector assembly on 100 mil grid.
Type V – Cable connector assembly on 100 mil grid, with a dielectric block containing crimp or solder
blade contacts.
1.2.2 Component parts. In addition, this specification covers component parts utilized in type III through
type V assemblies, or in related applications.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3, and 4 of this specification, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: DLA Land and
Maritime, ATTN: VAI, P.O. Box 3990, Columbus, OH 43218-3990 or email:
RectangularConnector@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.dla.mil.
Source: http://assist.dla.mil -- Downloaded: 2023-01-14T14:03Z
Check the source to verify that this is the current version before use.
