Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
or emailed to CommandStandards@navy.mil
, with the subject line “Document Comment”. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at http://assist.daps.dla.mil.
AMSC N/A FSC 8010
METRIC
DOD-E-24607A(SH)
w/INT. AMENDMENT 1
11 September 2006
USED IN LIEU OF
DOD-E-24607A
31 July 1987
MILITARY SPECIFICATION
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD
RESIN, SEMIGLOSS (METRIC)
This specification is approved for use by all Departments and Agencies of the Department of the
Defense.
1. SCOPE
1.1 Scope. This specification covers enamel, interior, nonflaming (dry), chlorinated
alkyd resin, semigloss formulated to a maximum volatile organic compound (VOC) content of
340 grams per liter (g/L) (2.83 pounds per gallon).
1.2 Classification. Enamel shall be of the following colors, as specified (see 6.2.1):
(a) Beach-sand, semigloss, formula no. MSTS-3
(b) Rose-wood, semigloss, formula no. MSTS-8
(c) Clipper blue, semigloss, formula no. MSTS-9
(d) Sun glow, semigloss, formula no. MSTS-15
(e) Soft white, semigloss, formula no. 124 (see 6.6)
(f) Pastel green, semigloss, formula no. 125
(g) Bulkhead gray, semigloss, formula no. 126
(h) Green gray, semigloss, formula no. 127
(i) Yellow gray, semigloss, formula no. 128
(j) Pearl gray, semigloss, formula no. 130
(k) Pastel blue, semigloss, formula no. 131
Downloaded from http://www.everyspec.com
