I INCH-POUND I
..
CC-G-2745
~ebrua
m 26. 1993
SUPERSEDING
KIL-G-19826F(YD)
26 December 1984
FEDERAL SPECIMCATION
GENERATOR SETS, DIESEL ENGINE,
ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION;
10 Kw THROUGH 1000 Icw
(NOT STOCKED)
This specification is approved by the Commissioner, Federal
Supply Service,
General Se~ices Administration, for the use
of all Federal agencies.
1. SCOPE
1.1 Stove.
This specification covers the requirements for diesel engine
driven, alternating current (AC),
electric generator sets to be used in
construction projects,
and for the replacement of generator sets in existing
installations which are used to supply standby, or prime power service. The
generaeor sets are not intended to be stocked or supported from stock in the
supply system.
1.2 Classification.
The generator sets will be of the.following types
styles, classes, voltage ratings, and sizes, as specified (see 6.2):
Type I-
Standby power - 10 to 1000 kilowatts (kW), (see 6.4.1)
Type II
- Prime power - 100 to 1000 kW, (see 6.4.2)
Style A -
Self-contained generator set (see 6.4.3)
Style B -
Fixed installation generator set (see 6.4.4)
Class 1 -
Single generator set operation ..;.
class 2
- Parallel generator set operation
lBeneficial comments (recommendations, additions,
deletions) and any pertinent
Idata which may be of use in improving this document should be addressed to: I
lCommanding Officer (Code 156), Naval Construction Battalion Center,
I
1621 Pleasant Valley Road, Port Hueneme, CA 93043-4300, by using the .
I
lStandardization Document Improvement Proposal (DD Form 1426) appearing at I
lthe end of this document or by letter.
I
,.,.
FSC 6115-
s . . -. -~-,..
% -.
..
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited.
