.-
‘mcH-PouNrl
I)DD-L-20F
March 30, 1990
SUPERSEDING
DDD-L-20E
March 7, 1980
FEDERAL SPECIFICATION
LABEL:
FOR CUYMING, EQUIPAGE, AND TENTAGE, (GENEML
us~
This specification is approved by the Commissioner,Federal Supply Service,
General Services Administration, for the use of all Federal agencies.
1.
SCOPE AND CLASSIFICATION
1.1 Scope. This specificationcovers the requirements for eight types of
labels, utilized in fabricated textile, plastic coated, and leather items.
1.2 Classification. The labels shall be of the foHowing types and
classes, as specified (see 6.2 and 6.5).
Type:
P..
VI
VII
VIII
Deleted (see 6.7)
Deleted (see 6.7)
Marking, heat transfer (decalcomania)
Marking, direct printing, stamping, or stenciling
Label, cloth, cotton, polyester or polyester/cotton
blend; heat sealable, adhesive coated, printed
Label, nonwoven, spunbonded polyester cloth or nonwoven,
80/20 polyester/cellulosecloth, impregnated, acrylic
coated, mildew-resistant printed
Pressure-sensitivelabel, smooth finish white paper,
rubber-based adhesive with high initial tack, basis
weight 20 pounds, bar coded
Tag, paper, standard bleach sulfate, basis weight
100 pounds, bar coded
.———.
—— .
——— ---—w
Beneficial comments (recommendations,additions, deletions) and any ‘:
pertinent data which may be of use
in improving this document
should be addressed to:
U.S. Army Natick Research, Development,
and Engineering Center, Natick, MA
01760-5014 by using the “
Standardization
Document
Improvement Proposal
(DD Form 1426)
appearing at the end of this document or by letter.
.— -.—.--——
AMSC N/A
&C 8315
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
