[ INCH-POUND I
FEDERAL SPECIFICATION
F-C-2791
November 29, 1991
SUPERSEDING
MIL-C-16278G(YD)
23 February 1983
COOLING TOWERS, LIQUID
This specification is approved by the Commissioner, Federal
supply-
of all
1. SCOPE
1.1 Stove.
Senice, General Services Administration, for the use
Federal agencies.
This specification covers factory assembled, induced
mechanical draft and forced mechanical draft
industrial use.
1.2 Classification.
The towers shall be
specified (see 6.1.1 and 6.2).
cooling towers for commercial and
of the following types, as
Type I
- Induced mechanical draft
Type II -
Forced mechanical draft
2.
APPLICABLE DOCUMENTS
2.1 Government documents,
2.1.1 Specifications and standards.
The following specifications and
standards, form a part of this document to the extent specified herein. Unless
otherwise specified (see 6.2), the issues of these documents are those listed in
the issue of the Department of Defense Index of Specifications and Standards
(DODISS) and supplement thereto, cited in the solicitation.
lBeneficial comments (recommendations, additions,
deletions) and any pertinent
Idata which may be of use in improving this document should be addressed to: I
#Commanding Officer (Code 156), Naval Construction Battalion Center, Port I
lHueneme, CA 93043-5000, by using the self-addressed Standardization
I
lDocument Improvement Proposal (DD Form 1426) appearing at the end of this I
Idocument or bv letter.
I
FSC 4130
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
