FF-B-187B
SUPPLEMENT 1
10 September
FEDERAL SPECIFICATION
BEARINGS, ROLLER, TAPERED
This specification
is approved by the Administrator,
Federal Supply Service,
General Services Administration,
for the use of all Federal Agencies.
SPECIFICATION SHEETS
FF-B-187/1
FF-B-187/2
FF-B-187/3
FF-B-187/4
FF–B-187/5
FF-B-187/6
FF-B-187/7
FF–B-187/8
FF-B-187/9
FF-B-187/10 -
FF-B-187/11 –
AMSC N/A
DISTRIBUTION STATEMENT
Bearing, Roller,
‘Tapered, Single Row, Normal Angle.
(Type TS)
Bearing, Roller,
Tapered, Single R
OW
, Normal Angle,
Flanged Cup.
(Type TSF)
Bearing, Roller,
Tapered, Single Row, Steep Angle.
(Type TSS)
Bearing, Roller,
Tapered, Single Row, Steep Angle,
Flanged Cup.
(Type TSSF)
Bearing, Roller,
Tapered, Double Row,
One Double Cone,
Two Single Cups. (Types
TDI and TDIS)
Bearing, Roller,
Tapered, Double ROW, Normal Angle,
Two Single Cones, One Double Cup.
(Type TOO)
Bearing, Roller,
Tapered, Double Row, Steep Angle,
TWO Single Cones, One Double CUP.
(Type TDOS)
Bearing, Roller,
Tapered, Double ROW, Normal Angle,
TWO Single Cones, One Double Cup, Nonadjustable.
1993
(Type TNA)
Bearing. Roller.
Tapered, Double Row, Steep Angle,
Two Single Cones,
One Double Cup, Nonadjustable.
(Type TNAS)
Bearing, Roller,
Tapered, Double Row, Straight Bore.
Two Single Cones with Contacting Front Faces Slotted
and Chamfered For Lubrication, One Double Cup with
Lubrication,
Holes and Groove.
(Type TNASW)
Bearing, Roller, Tapered,
Double Row, Straight Bore,
Two Single Cones,
Cone Back Face Rib Ground on the
Outer Diameter For Sealing Purposes, One Double Cup
with Lubrication Holes and Groove.
(TYPE TNASWE)
FSC 3110
A.
Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
