I INCH- POUND I
FF-P-2827
AMENDMENT- 1
March 25. 1994
FEDER4L SPECIFICATION
PADLOCK , KEY 0PER4TED , GENERAL FIELD SERVICE
‘lhis amendment, which forms a part of FF-P-2827, dated June 18, 1993,
is approved by the Commissioner, Federal Supply Se~ice, General Services
Administration, for the use of all Federal agencies.
MS&!.
1.2 Change to read:
“1.2 ~q. The padlocks covered by this
specification shall be Grade 2 for Size A Types 1, 2, and 3; and shall be Grade
3 for Size B Types 1, 2, and 3 as specified (see 1.2.1 and 3.2). ”
1.2.1 Change to read:
“1.2.1 Size and t.fue. The size shall be determined
by the shackle stock diameter, and the type shall be determined by keying
requirements:
Size A - Shackle diameter,
0.375 ~0.020 inch (10 ~0.51 mm) nominal.
Type 1 - Individual lock (no master keying) .
Type 2 - Master keyed sets.
Type 3 - Keyed alike sets.
Size B - Shackle diameter, 0.500 ~0. 020 inch (13 *O.51 mm) nominal.
Type 1 - Individual lock
(no master keying)
Type 2 - Master keyed sets.
T~e 3 - Keyed alike sets. ”
1.2.2 Change to read: “1.2.2
part or identifvi E number (PIN~. The PINs
for the padlocks covered by this specification shal~ be FFP2827 -A-1,
FFP2827-A-2, FFP2827-A-3, FFP2827-B-1, FFP2827-B-2, and FFP2827-B-3 (see 6.2
and 6 .5).”
3.5.3.2 Change to read: “3.5.3.2 ~. Each padlock shall be furnished
with two keys. Identical keys for each padlock shall be joined with a steel
wire ring. The steel ring with keys attached shall fit over the shackle.
Padlocks supplied in a group as a set shall be keyed alike, keyed individually
or master keyed as specified (see 6.2) .”
AMSC N/A
FSC 5360
DISTKIBU TION STATEMENT A. Approved for public release: distribution is
unlimited.
Downloaded from http://www.everyspec.com
