FF-S-200B
17 AUGUST 2004
SUPERSEDING
FF-S-200A
October 24, 1969
FEDERAL SPECIFICATION
SETSCREWS: HEXAGON SOCKET AND
SPLINE SOCKET, HEADLESS
The General Services Administration has authorized the use of this
federal specification by all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope
. This specification covers hexagon socket and spline socket
headless setscrews.
1.2 Classification
.
1.2.1 Types
. Setscrews shall be of the following types, as specified
(see 6.2).
Type I - Hexagon socket, headless.
Type II - Spline socket, headless.
1.2.2 Styles
. Setscrews shall be of the following styles, as specified
(see 6.2).
Style 1 - Flat point.
Style 2 - Cone point.
Style 3 - Oval point.
Style 4 - Cup point.
Style 5 - Full-dog point.
Style 6 - Half-dog point.
1.2.3 Size
. Setscrews shall be classified by size in accordance with
the basic major diameter of the thread (see 6.2).
1.2.4 Length
. Setscrews shall be of the length specified in 6.2.
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA
19111-5096 or emailed to dscpg&ispeccomments@dla.mil
. Since contact information can
change, you may want to verify the currency of this address information using the
ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A FSC 5305
Downloaded from http://www.everyspec.com
