INCH-POUND
FF-S-1362A
8 October 2014
SUPERSEDING
FF-S-1362
18 May 1970
FEDERAL SPECIFICATION
STUD, PLAIN, GENERAL PURPOSE
The General Services Administration has authorized the use of this federal
specification by all federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers plain general purpose carbon or alloy steel, corrosion
resisting steel, brass, and nickel-copper studs.
1.2 Classification. Plain general purpose studs may be of the style and sizes specified on
NASM51864.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards
form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28/2 Screw-Thread Standards for Federal Services Section 2
Unified Inch Screw Threads- UN and UNR Thread Forms
FED-STD-H28/6 Screw-Thread Standards for Federal Services Section 6
Gages and Gaging for Unified Screw Threads- UN and UNR
Thread Forms
FED-STD-H28/23 Screw-Thread Standards for Federal Services Section 23
Class 5 Interference-Fit Screw Threads
QQ-N-281 Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire,
Forgings and Structural and Special Shaped Sections
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or e-mail to dscpg&ispecomments@dla.mil
. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.dla.mil .
