GG-S-1341A
November 26, 1975
SUPERSEDING
Int. Fed. Spec. GG-S-001341
April 24, 1970
Fed. Spec. GG-S-751a (In part)
November 9, 1940
FEDERAL SPECIFICATION
WASHER-STERILIZER SURGICAL INSTRUMENT
This specification was approved by the Commissioner, Federal Supply
Service General Services Administration, for the use of all Federal
agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. The washer-sterilizer covered under this specification shall be the
horizontal, vacuum-pressure, gravity air removal type for processing surgical instruments
and utensils, using saturated steam as the sterilizing agent.
1.2 Classification. The washer-sterilizer shall be of one size and the following style
as specified (see 6.2).
1.2.1 Size. The minimum clearance inside dimensions of the washing and sterilizing
chamber shall be 16 inches wide by 16 inches high by 26 inches long.
1.2.2 Style.
Style A - Single door; cabinet enclosed (free standing)
Style B - Single door; for recessing through one wall partition
Style C - Double door (for goods pass-thru); for recessing through one wall
partition
2. APPLICABLE DOCUMENTS
2.1 The following documents, of the issues in effect on date of invitation for bids or
request for proposal form a part of this specification to the extent specified herein.
Federal Specifications:
PPP-T-60 - Tape Pressure Sensitive Adhesive, Waterproof for Packaging.
PPP-B-601 - Boxes, Wood, Cleated Plywood.
PPP-B-621 - Boxes, Wood Nailed and Lock-Corner.
PPP-B-640 - Boxes, Fiberboard, Heavy Duty.
CC-M-636 - Motors, Fractional Horsepower, (Alternating Current).
PPP-C-843 - Cushioning Material, Cellulosic.
QQ-N-28l - Nickel-Copper Alloy Bars, Plates, Rods, Sheets, Strips, Wire,
Forgings, and Structural and Special Shaped Sections.
QQ-S-766 - Steel Plate, Sheets, and Strip-Corrosion-Resisting.
Downloaded from http://www.everyspec.com
