[INCH-POUND]
L-P-410A
AMENDMENT 4
July 15, 1999
SUPERSEDING
AMENDMENT 3
May 21, 1974
FEDERAL SPECIFICATION
PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS,
MOLDED AND CAST PARTS
The General Services Administration has authorized the use of this amendment
which forms a part of L-P-410A, dated March 16, 1966, by all federal agencies.
PAGE 1
1.2: Delete lines 10 and 11 and substitute “Polyhexamethylene amide (Nylon 6/9, 6/10, and
6/12), low moisture absorption polyamide.”
1.2.1, line 2: Delete “sebacamide (Nylon 6/10)” and substitute “amide (Nylon 6/9, 6/10, and
6/12).”
* 2.1, under Federal Specifications: Add “CCC-C-46 – Cloth, Cleaning, Nonwoven Fabric.”
2.2, under Federal Standards: Delete “Fed. Std. No. 102 – Preservation, Packaging, and
Packing Levels.”
PAGE 2
3.2, lines 4 and 5: Delete “sebacamide (Nylon 6/10)” and substitute “amide (Nylon 6/9,
6/10, and 6/12).”
3.4, line 3: Delete “6/10” and substitute “6/9, 6/10, and 6/12.”
PAGE 3
TABLE I, column 2 (Nylon 6/6), opposite tensile strength for rods 1 inch and under:
Delete “13,000 and substitute “11,000.”
TABLE I, column 2 (Nylon 6/6), opposite tensile strength for rods over 1 inch: Delete
“12,000” and substitute “13,000.”
AMSC N/A 1 of 3 FSC 9330
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
