L-T-1512A
June 9, 1985
SUPERSEDING
Int. Fed. Spec. L-T-001512
October 22, 1968
FEDERAL SPECIFICATION
TAPE, PRESSURE SENSITIVE
ADHESIVE, PIPE WRAPPING
This specification was approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use of
all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification establishes the requirements for a pressure
sensitive adhesive tape, suitable for corrosion prevention of exterior surfaces
of metal pipe.
1.2 Classification. The pressure sensitive adhesive tape covered by this
specification shall be of the following types, as specified (see 6.2):
Type I - Standard thickness.
Type II - Heavy duty thickness.
Type III - Standard thickness for low temperature application.
2. APPLICABLE DOCUMENTS
2.1 The following documents, of the issues in effect on date of invitation
for bids or request for proposal, form a part of this specification to the
extent specified herein.
Federal Specification:
PPP-T-680 - Tape, Pressure-Sensitive Adhesive; Packaging and Packing of.
Federal Standard:
Federal Test Method Std. No. 147 - Tapes, Pressure-Sensitive and Gummed;
Methods of Inspection, Sampling, and
Testing.
Downloaded from http://www.everyspec.com
