QQ-A-200/1D
23 June 1983
SUPERSEDING
QQ-A-200/1C
August 20, 1970
FEDERAL SPECIFICATION SHEET
ALUMINUM ALLOY 3003, BAR, ROD, SHAPES,
TUBE AND WIRE, EXTRUDED
This specification was approved by the Assistant Administrator,
Office of Federal Supply and Services, General Services, Admin-
istration, for the use of all Federal agencies.
The complete requirements for procuring the aluminum alloy 3003, bar, rod, shapes,
and wire, extruded described herein shall consist of this document and the latest
issue of QQ-A-200/GEN (see 2.1).
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers the specific requirements for aluminum alloy
3003 bar, rod, shapes, tube and wire produced by extrusion.
1.2 Classification.
1.2.1 Tempers. The bar, rod, shapes, tube and wire shall be of the following
tempers: O, H112, and F, as specified (see 6.2). The definitions of these tempers
shall be as specified in QQ-A-200/GEN.
1.2.2 Tubing. Tubing shall be additionally classified as follows:
Type Description
I - Tubing extruded from hollow billets using die and mandrel (see
QQ-A-200/GEN)
II - Tubing extruded from solid billets using a porthole or spider die or
similar tooling (see QQ-A-200/GEN)
(See 6.2 and section 6 of QQ-A-200/GEN for applications of each type)
2. APPLICABLE DOCUMENTS
2.1 Government publications. The issues of the following documents, in effect on
date of invitation for bids or solicitation for offers, form a part of this
specification to the extent specified herein.
FSC 9530, 9525
4710, 9540
Downloaded from http://www.everyspec.com
