QQ-A-200E/GEN
November 6, 1980
SUPERSEDING
Fed. Spec. QQ-A-200D
August 20, 1970
FEDERAL SPECIFICATION
ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL
SHAPES,TUBE AND WIRE, EXTRUDED:
GENERAL SPECIFICATION FOR
This specification was approved by the Commissioner, Federal Supply Service,
General Services Administration for the use of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers the general requirements for
aluminum alloy bar, rod, shapes, structural shapes, tube and wire, extruded.
Specific requirements for these products in a particular alloy are covered by
the applicable detailed specification (see 6.3).
1.2 Classification.
1.2.1 Tempers. Bar, rod, shapes, structural shapes, tube and wire shall
be classified in tempers as specified in the detailed specification. The
definitions of tempers shall be as specified in American National Standard
ANSI H35.1.
2. APPLICABLE DOCUMENTS
2.1 The following documents, of the issues in effect on date of
invitation for bids or request for proposal, form a part of this
specification to the extent specified herein:
Federal Standards:
Fed. Std. No. 123 - Marking for Shipment (Civil Agencies)
Fed. Test Method - Metals; Test Methods.
Std. No. 151
Fed. Std. No. 184 - Identification Marking of Aluminum,
Magnesium and Titanium.
(Activities outside the Federal Government may obtain copies of Federal
specifications, standards, and commercial item descriptions, as outlined
under General Information in the Index of Federal Specifications, Standards
and Commercial Item Descriptions. The Index, which includes cumulative
bimonthly supplements as issued, is for sale on a subscription basis by the
Superintendent of Documents, U.S. Government Printing Office, Washington, DC
20402.)
FSC 4710, 9525
9530, 9540
Downloaded from http://www.everyspec.com
