INCH-POUND
RR-F-191/3E
7 JUNE 2006
SUPERSEDING
RR-F-191/3D
14 May 1990
FEDERAL SPECIFICATION SHEET
FENCING, WIRE AND POST, METAL (CHAIN-LINK
FENCE POSTS, TOP RAILS AND BRACES)
(DETAIL SPECIFICATION)
The General Services Administration has authorized the use of this federal specification
sheet by all Federal agencies.
(This specification forms a part of the latest issue of Federal specification RR-F-19l/GEN).
1. SCOPE
AND CLASSIFICATION
1.1
Scope. This specification covers general requirements for chain-link fence posts, top rails,
and braces.
1.2
Classification. Chain-link fence posts, top rails, and braces will be of the applicable class, size
and grade as specified (see 6.1):
Class 1 – Steel pipe.
Grade A - ASTM F1083 schedule 40 pipe, hot-dip zinc-coated after fabrication with
1.8 ounces of zinc per square foot of coated surface area.
Grade B - ASTM F1043 pipe Group IC, having a Type B external hot-dip zinc-coated
with 0.9 ounces of zinc per square foot with a clear organic overcoat.
Interior coating to be Type B hot-dip zinc-coating 0.9 ounces per square
foot or Type D 81% zinc pigmented coating, minimum thickness of 0.3 mils.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Philadelphia (DSCP), ATTN: DSCP-ITAA, 700 Robbins Avenue., Philadelphia, PA 19111-5096
or e-mail to dscpg&inspecomments@dla.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at
http://assist.daps.dla.mil.
FSC 5660
Downloaded from http://www.everyspec.com
