RR-F-191K/GEN
14 May 1990
-----------
SUPERSEDING
RR-F-191J/GEN
July 22, 1981
FEDERAL SPECIFICATION
FENCING, WIRE AND POST METAL (AND GATES, CHAIN-LINK
FENCE FABRIC, AND ACCESSORIES)
(GENERAL SPECIFICATION)
This Federal Specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use of all
Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers general requirements for chain-link
fencing and accessories.
1.2 Classification. Classification for the various parts of chain-link
fencing are included in the detail specifications.
RR-F-191/1 - Fencing, Wire and Post, Metal (Chain-Link Fence Fabric).
RR-F-191/2 - Fencing, Wire and Post, Metal (Chain-Link Fence Gates).
RR-F-191/3 - Fencing, Wire and Post, Metal (Chain-Link Fence Posts,
Top Rails, and Braces).
RR-F-191/4 - Fencing, Wire and Post, Metal (Chain-Link Fence
Accessories).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specification and standards. The following specification and
standards form a part of this specification to the extent specified herein.
Unless otherwise specified, the issues of these documents are those listed in
the issue of the Department of Defense Index of Specifications and Standards
(DODISS) and supplement thereto, cited in the solicitation (see 6.2).
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, Port *
*Hueneme, CA 93043-5000, by using the self-addressed Standardization *
*Document Improvement Proposal (DD Form 1426) appearing at the end of this *
*document or by letter. *
*-----------------------------------------------------------------------------*
FSC 5660
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
