Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data
that may improve this document should be sent to: STDZNMGT@dla.mil or Defense Supply
Center Richmond (DSCR), ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond,
VA 23297-5616. Since contact information can change, you may want to verify the currency
of this address information using the ASSIST database at https://assist.daps.dla.mil/.
AMSC N/A FSC 4010
INCH-POUND
RR-W-410G
24 June 2010
SUPERSEDING
RR-W-410F
6 December 2007
FEDERAL SPECIFICATION
WIRE ROPE AND STRAND
The General Services Administration has authorized the use of this federal
specification by all federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers wire ropes and wire seizing strands (see 6.1). This
specification does not include all types, classes, constructions, and sizes of wire rope and strand
that are commercially available, but it is intended to cover the more common types, classes,
constructions, and sizes that are suitable for federal government use.
1.2 Classification.
1.2.1 Types, classes, constructions, and sizes. Wire ropes and wire seizing strands covered by
this specification shall be of the following types, classes, constructions, and sizes as specified
(see 6.2 (b)). For general rules for selection of wire rope and strand, see 6.3 and the Wire Rope
Users Manual. For wire rope and strand definitions and terms, see 6.4 and the Wire Rope Users
Manual.
Type I - General purpose wire ropes
Class 1 - 6 by 7
Class 2 - 6 by 19
Construction 1 - 6 by 19 (2 operations)
Construction 2 - 6 by 19 Warrington
Construction 3 - 6 by 19 Seale
Construction 4 - 6 by 19 Filler wire
Construction 5 - 6 by 19 Warrington-Seale
Downloaded from http://www.everyspec.com
