SS-S-200E
August 15, 1984
SUPERSEDING
SS-S-200D
July 23, 1969
FEDERAL SPECIFICATION
SEALANTS, JOINT, TWO-COMPONENT, JET-BLAST-RESISTANT, COLD-APPLIED,
FOR PORTLAND CEMENT CONCRETE PAVEMENT
This specification was approved by the Assistant Administrator,
Office of Federal Supply and Services, General Services Administration,
for the use of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers two types of two-component,
elastomeric, cold-applied, jet-fuel- and jet-blast-resistant sealing compounds
for use in sealing joints and cracks in portland cement concrete pavement.
Certain sealants require a primer to produce satisfactory adhesion (see
3.2.3). Machine application will require specialized equipment designated for
the specific formulation, for satisfactory application (see 3.3.1).
1.2 Classification. The sealants shall be of the following types (see
6.2):
Type M - Machine application, fast curing
Type H - Hand mixed, retarded cure
2. APPLICABLE DOCUMENTS
2.1 The following documents, of the issues in effect on date of invitation
for bids or request for proposal, form a part of this specification to the
extent specified herein.
Federal Specifications
PPP-B-601 - Boxes, Wood, Cleated-Plywood
PPP-C-96 - Cans, Metal, 28 Gauge and Lighter
PPP-P-704 - Pails, Metal: (Shipping, Steel, 1 Through 12 Gallons)
Federal Standards
FED-STD-123 - Marking for Shipment (Civil Agencies)
FED-STD-313 - Material Safety Data Sheets Preparation and the
Submission of
FSC 8030
Downloaded from http://www.everyspec.com
