IINCH-POUND(
T-R-571E
March 13, 1990
SUPERSEDING
Fed. Spec. T-R-571D
January 30, 1980
FEDERAL SPECIFICATION
ROPE, COTTON,,OR COTTON AND POLYESTER
This specificationwas approved by the Commissioner, Federal ,SupplyService,
General Services Administration,
for the uae of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 m.
This specification covers cotton or cotton/poyester rope.
1.2 Classification.
The rope shall be of the following classes and sizes, as
specified (see 6.2).
Class 1 - Natural
Claas 2 - Mildew-resistant treated
Sizes, (circumference,inches): 3/8; 518; 3/4; 1-118; 1-1/2; 2-114; 3
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications,
standards, and handbooks.
The following specifications,
standards, and handbooks form a part of this document to the extent specified
herein. Unless otherwise specified, the issuea of these documents are those
listed in the Department of Defense Index of Specifications’and Standards (DODISS)
and supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations,additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: U.S. Army Natick Research,
Development, and Engineering
Center, Natick, MA 01760-5014 by using the self-addressed Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 4020
DISTRIBUTION STATEMENT A.
Approved for public.release;distribution is unlimited.
Downloaded from http://www.everyspec.com
