DATA ITEM DESCRIPTION
Title: DEPARTMENT OF DEFENSE (DoD) TEST METHOD STANDARD
DOCUMENTS
Number: DI-SDMP-81475A Approval Date: 1 August 2003
AMSC Number: D7509 Limitation: N/A
DTIC Applicable: No GIDEP Applicable: No
Office of Primary Responsibility: OSD-SO
Applicable Forms: N/A
Use, Relationships: A DoD Test Method Standard will be used to specify procedures or criteria
for measuring, identifying, or evaluating qualities, characteristics, and properties of a product or
process.
This Data Item Description contains the content and format preparation instructions for DoD
Test Method standards and their associated documents that are described in the following
paragraphs of MIL-STD-962D. Only those documents listed below will be required when
specified individually on contract.
a. DoD Test Method Standard – Paragraphs 4.1 through 5.15.
b. DoD Test Method Standard Revision – Paragraph 5.17.
c. DoD Test Method Standard Change – Paragraphs 5.18 through 5.18.7.
d. DoD Test Method Standard Inactive for New Design Notice – Paragraph 5.19.2.
e. DoD Test Method Standard Cancellation Notice – Paragraph 5.19.3.
f. DoD Test Method Standard Reinstatement Notice – Paragraph 5.19.4.
g. DoD Test Method Standard Reactivation Notice – Paragraph 5.19.5.
h. DoD Test Method Standard Administrative Notice – Paragraph 5.19.6.
This DID supersedes DI-SDMP-81475.
Requirements:
1. Reference documents.
The applicable issue of the documents cited herein, including their
dates and dates of any applicable notices and revisions, shall be as specified in the contract.
2. Format and content.
Format and content for DoD Test Method Standards shall be as follows:
a. DoD Test Method Standard
. Format and content of DoD Test Method Standards shall
be in accordance with MIL-STD-962, paragraphs 4.1 through 5.15.
b. DoD Test Method Standard Revision
. Format and content of DoD Test Method
Standard Revisions shall be in accordance with MIL-STD-962, paragraph 5.17.
c. DoD Test Method Standard Changes
. Format and content of DoD Test Method
Standard Changes shall be in accordance with MIL-STD-962, paragraphs 5.18 through 5.18.7.
Downloaded from http://www.everyspec.com
