DATA ITEM DESCRIPTION
Form Approved
OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources,
gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this
collection of information, including suggestions for reducing this burden to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson
Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, D.C. 20503.
1. TITLE
Technical Manual (TM) Contractor Furnished Aeronautical Equipment or
Contractor Furnished Equipment (CFAE/CFE) Notices
2. IDENTIFICATION NUMBER
DI-TMSS-80067B
3. DESCRIPTION/PURPOSE
3.1 The CFAE/CFE Notice is a planning and approval document used to identify TM data required for support, operation,
or maintenance for any CFAE/CFE components installed in or furnished as accessories or support equipment for any
system or end item.
3.2 The CFAE/CFE Notice is used by the contractor to identify the need for supporting technical data and to recommend
development of new TMs, modification of existing TMs, or acquisition of existing commercial data.
4. APPROVAL DATE
97/01/23
5. OFFICE OF PRIMARY RESPONSIBILITY (OPR)
F/ESC-AV-2
6a. DTIC APPLICABLE 6b. GIDEP
APPLICABLE
7. APPLICATION/INTERRELATIONSHIP
7.1 This Data Item Description (DID) contains the format and content preparation instructions for the data product
generated by the specific and discrete task requirement as delineated in the contract.
7.2 This DID is applied to TM acquisition programs when the total requirements for support of contractor furnished
equipment cannot be determined prior to contractor award.
7.3 This DID supersedes DI-TMSS-80067A.
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
10. PREPARATION INSTRUCTIONS
10.1 Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates
of any applicable amendments, notices, and revisions, shall be as specified in the contract.
10.2 Format. Contractor format is acceptable. The Notice may be similar to the format provided in Figure 1.
10.3 Content. Notices shall contain the following information:
10.3.1 Prime contractor name. The name of the system or equipment prime contractor or manufacturer.
10.3.2 Prime contractor address. The mailing address of the named contractor..
10.3.3 Prime contractor Commercial and Government Entity (CAGE) code. The CAGE code for the named contractor, as
shown in Cataloging Handbook H4/H8 in parentheses.
10.3.4 Design activity name. The name of the design activity, when not the same as the prime contractor.
10.3.5 Design activity address. The mailing address of the design activity when not the same as the prime contractor.
10.3.6. Design activity CAGE code. The CAGE code from the H4/H8 Cataloging Handbook. If the prime contractor is
modifying a design activity item, an asterisk (*) is placed in front of the design activity code, and a brief explanation of the
modification is included in the Remarks.
(Continued on page 2)
11. DISTRIBUTION STATEMENT
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
DD Form 1664, APR 89 Previous editions are obsolete Page 1 _of 5 Pages
Downloaded from http://www.everyspec.com
