NOT MEASUREMENT SENSITIVE
MIL-PRF-16005F
01 AUG 2003
SUPERSEDING
MIL-P-16005E
31 January 1968
PERFORMANCE SPECIFICATION
PROPELLANT, HYDROGEN PEROXIDE
1. SCOPE.
1.1 Scope
. This specification covers four types and two grades of hydrogen peroxide propellant.
1.2. Classification
. Hydrogen peroxide propellant will be of the following designated types and
grades:
Types
70 – 71.0 to 73.0 percent hydrogen peroxide
85 – 85.0 to 87.0 percent hydrogen peroxide
90 – 89.5 to 91.0 percent hydrogen peroxide
98 – 98.0 to 99.0 percent hydrogen peroxide
Grades
ES – Extra Stabilizers: contains higher concentration of stabilizers
HP – High Purity: stricter limits on type and concentration of stabilizers/metals
2. APPLICABLE DOCUMENTS
2.1 General
. The documents listed in this section are specified in Sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents
.
2.2.1 Specifications, standards, and handbooks. The following specifications form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Code PS, DESC-BPE RM 2954, Defense Energy Support Center, 8725 John J Kingman
Road, Fort Belvoir VA 22060-6222, by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
AMSC N/A FSC 9135
DISTRIBUTION STATEMENT A
. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
