**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-32 12 17.19 (November 2020)
------------------------------------
Preparing Activity: USACE New
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 32 - EXTERIOR IMPROVEMENTS
SECTION 32 12 17.19
FUEL RESISTANT ASPHALT PAVING FOR AIRFIELDS - SURFACE COURSE
11/20
PART 1 GENERAL
1.1 FULL PAYMENT
1.1.1 Method of Measurement
1.1.2 Basis of Payment
1.2 PERCENT PAYMENT
1.2.1 Payment Adjustment for Laboratory Air Voids
1.2.1.1 Pay Factor Example for Laboratory Air Voids
1.2.2 Payment Adjustment for In-place Densities
1.2.2.1 Pay Factor Based on In-place Density
1.2.3 Payment Adjustment for Smoothness (Final Wearing Surface Only)
1.2.3.1 Profilograph Testing
1.2.4 Pay Factor Based on Plan Grade
1.3 REFERENCES
1.4 SUBMITTALS
1.5 CONTRACTOR QUALITY CONTROL STAFF
1.6 ACCEPTANCE
1.6.1 Acceptability of Work
1.6.2 Acceptance Requirements
1.6.3 Pavement Lots
1.6.4 Sublot Sampling
1.6.4.1 Additional Sampling and Testing
1.6.4.2 Theoretical Maximum Density (TMD)
1.6.4.3 Laboratory Air Voids
1.6.5 In-place Density
1.6.6 Surface Smoothness
1.6.6.1 Smoothness Requirements
1.6.6.1.1 Straightedge Testing
1.6.6.1.2 Profilograph Testing
1.6.6.2 Testing Method
1.6.6.2.1 Straightedge Testing
1.6.6.2.2 Profilograph Testing
1.6.6.2.3 Bumps ("Must Grind" Areas)
1.6.7 Plan Grade
SECTION 32 12 17.19 Page 1
