DATA ITEM DESCRIPTION
Title: ELECTROMAGNETIC INTERFERENCE TEST PROCEDURES (EMITP)
Number: DI-EMCS-80201C Approval Date: 20071130
AMSC Number: F9032 Limitation: N/A
DTIC Applicable: N/A GIDEP Applicable: N/A
Office of Primary Responsibility: 11 (ASC/ENA)
Applicable Forms:
Use, Relationships: The EMITP describes the measurement procedures that will be used to
demonstrate that an equipment or subsystem complies with its contractual electromagnetic
interference (EMI) requirements based on MIL-STD-461, including how the general test
procedures in the standard will be applied to the specific equipment or subsystem.
a. This Data Item Description (DID) contains the format, content, and intended use
information for the data deliverable resulting from the work task described for EMITP in
paragraph 5.1 of MIL-STD-461.
b. This DID is related to DI-EMCS-80199C, Electromagnetic Interference Control
Procedures (EMICP), and DI-EMCS-80200C, Electromagnetic Interference Test Report
(EMITR).
c. DI-EMCS-80201C supersedes DI-EMCS-80201B.
Requirements:
1. Reference documents. The applicable issue of the documents cited herein, including their
approval dates and dates of any applicable amendments, notices, and revisions, shall be as
specified in the contract.
2. Format. Contractor format is acceptable.
3. Content. The EMITP shall contain the following:
3.1. Introduction. The introduction of the EMITP shall include the following:
a. A table describing all the tests to be performed, the applicable section within the
EMITP, and the corresponding test procedure from MIL-STD-461.
b. Description of the Equipment Under Test (EUT), including its function,
characteristics, intended installation, and power usage.
1
Downloaded from http://www.everyspec.com
